Why SIW Might Not Show Fan Speeds

Motherboard sensor limitations

Many modern motherboards don't expose fan RPM data through standard SMBus or ACPI interfaces.
SIW relies on hardware monitoring chips, such as ITE, Winbond, and Nuvoton, but if the BIOS doesn't publish those values, SIW can't display them.

Fans connected incorrectly

If fans are powered directly from the PSU, via Molex or SATA, or through a hub without tachometer feedback, SIW won't see RPM data.
Only fans connected to motherboard headers with tachometer pins can report speed.

Chipset or driver support gaps

Some newer Super I/O chips require updated detection routines.
If SIW doesn't yet support that specific chip, fan speeds won't be shown.

BIOS restrictions

Certain vendors lock down sensor access, allowing only their proprietary utilities, such as ASUS AI Suite or MSI Dragon Center, to read fan RPM.

Low or fixed RPM fans

Fans spinning below a threshold, such as 200 RPM, or locked at a fixed speed may not report values, so SIW shows nothing.